Material differentiation of traction seat

Material differentiation of traction seat

The front panel of the fifth wheel is the main friction interface after connecting with the trailer. The materials are divided into ordinary steel and high-density wear-resistant materials. The thickness of the panel varies according to the model of the fifth wheel. The thickness of 50 # traction seat panel is 8mm and 90 #. The thickness of the panel is 10mm. Because the panel is a friction interface, it is necessary to pay close attention to its wear during use. If the wear of 50 # is less than 4mm and that of 90 # is less than 5mm, the panel must be replaced.

Whether the panel is made of ordinary steel or high-density wear-resistant material, it will wear over time. If the panel is abnormally worn, it is necessary to check whether the lubricating oil on the panel is deteriorated, whether there is debris scratch, and whether the plane of the trailer slide plate is deformed.

The above is the material differentiation of the traction seat. If you have any other questions, please contact us