The manufacturer of the tractor seat will show you the steps of tractor decoupling
2022-10-15 From: Tangshan Longquan Machinery Co.,Ltd Browsing times:443
The manufacturer of the tractor seat will show you the steps of tractor decoupling
1. Park the vehicle on a flat and solid ground.
2. Fix the semi-trailer to prevent it from sliding.
3. Lift the outrigger until the traction seat is not under pressure.
4. Remove all cables and gas lines.
5. Open the traction seat by pulling the handle.
If necessary, use a hammer to knock the clearance adjusting screw to release the overtightened lock wedge, or use a wrench to rotate the clearance adjusting screw.
6. Drive the tractor away from the semi-trailer, and the tractor seat will enter the pre coupling state again.
In the case of air suspension, do not exhaust the air suspension airbag before the drawbar locking mechanism is opened, which will make it difficult to open the locking mechanism, and may also damage the locking mechanism.
If you want to avoid making mistakes in anything, you must obey the rules. If you operate in strict accordance with the operation process, you will reduce or avoid unnecessary mistakes or injuries. This is the value of standard operation instructions in general productive enterprises. When the driver friends or new drivers strictly follow the steps of coupling and uncoupling, they will operate the vehicle more smoothly and reduce trouble and even safety accidents.
The above is the towing vehicle decoupling steps that the manufacturer of the towing vehicle will show you. If you have any other questions, please contact us!
